Linux Regnum help

Here you will find sections to treat any problem your having.

Moderators: Wyatt, Council

User avatar
Bitmoose
Initiate
Initiate
Posts: 183
Joined: July 13th, 2009, 4:00 am
Location: San Antonio, TX

Re: Linux Regnum help

Unread post by Bitmoose » May 23rd, 2011, 4:17 pm

Hmm... but i was able to play regnum just fine, when i used windows 7 on this same computer, even on high quality....

At least i think thats my card... i googled the model of my computer, presario cq50-142us, and that is what it said i had...

User avatar
Dracice
Development Team
Development Team
Posts: 69
Joined: December 23rd, 2009, 6:02 pm

Re: Linux Regnum help

Unread post by Dracice » May 30th, 2011, 7:54 am

open terminal (ALT+F2 -> gnome-terminal)
and write this into terminal

Code: Select all

lspci
post output here

Code: Select all

dmesg
post output here
Dracice ⚔ [60] : Salamek ⚕ [30] : Caprica Six [50]

User avatar
Bitmoose
Initiate
Initiate
Posts: 183
Joined: July 13th, 2009, 4:00 am
Location: San Antonio, TX

Re: Linux Regnum help

Unread post by Bitmoose » May 30th, 2011, 4:20 pm

nolan@nolan-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)



nolan@nolan-laptop:~$ dmesg
ating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430376] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430378] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430381] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430383] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430386] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430388] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430391] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430394] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430397] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430399] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430402] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430404] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430407] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430410] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430412] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430415] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430418] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430420] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 15.430423] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 15.430426] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 15.430428] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 15.430431] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 15.430491] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 15.478723] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.479824] Registered led device: ath5k-phy0::rx
[ 15.479949] Registered led device: ath5k-phy0::tx
[ 15.479962] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 15.603243] Console: switching to colour frame buffer device 160x50
[ 15.603281] fb0: inteldrmfb frame buffer device
[ 15.603283] drm: registered panic notifier
[ 15.624140] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.681921] acpi device:03: registered as cooling_device2
[ 15.682194] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 15.682335] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 15.682558] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.683719] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.683807] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 15.683846] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.770940] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000
[ 15.815572] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 15.815871] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 15.816430] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 15.837360] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input10
[ 15.970956] ppdev: user-space parallel port driver
[ 17.207761] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 19.699749] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 59.512665] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[ 59.513921] wlan0: authenticated
[ 59.513987] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[ 59.515988] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=2)
[ 59.515993] wlan0: associated
[ 59.516802] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 59.516895] cfg80211: Calling CRDA for country: US
[ 59.522530] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522537] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522539] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522543] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522545] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522548] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522550] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522554] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522556] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522559] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522561] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522564] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522567] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522570] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522572] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522575] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522578] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522581] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522583] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522586] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522589] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 59.522592] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 59.522594] cfg80211: Disabling freq 2467 MHz
[ 59.522596] cfg80211: Disabling freq 2472 MHz
[ 59.522597] cfg80211: Disabling freq 2484 MHz
[ 59.522603] cfg80211: Regulatory domain changed to country: US
[ 59.522604] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 59.522607] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 59.522610] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 59.522614] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 59.522617] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 59.522619] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 59.522622] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 60.951411] Intel AES-NI instructions are not detected.
[ 61.017031] padlock_aes: VIA PadLock not detected.
[ 62.571036] wlan0: deauthenticated from 00:25:3c:7f:a1:a9 (Reason: 2)
[ 62.616141] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 62.616150] cfg80211: Restoring regulatory settings
[ 62.616156] cfg80211: Calling CRDA to update world regulatory domain
[ 62.621747] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 62.621757] cfg80211: World regulatory domain updated:
[ 62.621760] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 62.621764] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 62.621768] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 62.621771] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 62.621774] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 62.621776] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 63.470071] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[ 63.471330] wlan0: authenticated
[ 63.471366] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[ 63.473227] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=2)
[ 63.473232] wlan0: associated
[ 63.474116] cfg80211: Calling CRDA for country: US
[ 63.480354] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480359] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480362] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480366] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480368] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480371] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480374] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480377] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480379] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480382] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480384] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480387] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480391] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480394] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480396] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480399] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480401] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480404] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480407] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480410] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480412] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 63.480415] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[ 63.480417] cfg80211: Disabling freq 2467 MHz
[ 63.480419] cfg80211: Disabling freq 2472 MHz
[ 63.480421] cfg80211: Disabling freq 2484 MHz
[ 63.480425] cfg80211: Regulatory domain changed to country: US
[ 63.480427] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 63.480430] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 63.480433] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 63.480436] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 63.480439] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 63.480441] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 63.480444] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 69.592017] wlan0: no IPv6 routers present
[37661.594824] wlan0: deauthenticating from 00:25:3c:7f:a1:a9 by local choice (reason=3)
[37661.660157] cfg80211: All devices are disconnected, going to restore regulatory settings
[37661.660165] cfg80211: Restoring regulatory settings
[37661.660178] cfg80211: Calling CRDA to update world regulatory domain
[37661.667467] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[37661.667479] cfg80211: World regulatory domain updated:
[37661.667483] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[37661.667490] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[37661.667496] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[37661.667502] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[37661.667507] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[37661.667513] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[37675.655804] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[37675.657209] wlan0: authenticated
[37675.657245] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[37675.658896] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=4)
[37675.658900] wlan0: associated
[37675.659697] cfg80211: Calling CRDA for country: US
[37675.666620] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[37675.666626] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666629] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[37675.666632] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666634] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[37675.666637] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666640] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[37675.666642] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666645] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[37675.666648] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666650] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[37675.666653] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666656] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[37675.666658] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666661] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[37675.666664] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666666] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[37675.666669] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666672] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[37675.666675] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666677] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[37675.666680] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[37675.666682] cfg80211: Disabling freq 2467 MHz
[37675.666684] cfg80211: Disabling freq 2472 MHz
[37675.666686] cfg80211: Disabling freq 2484 MHz
[37675.666690] cfg80211: Regulatory domain changed to country: US
[37675.666692] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[37675.666695] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[37675.666698] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[37675.666700] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[37675.666703] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[37675.666706] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[37675.666709] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[41669.304522] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[43463.733996] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[45801.564050] usb 7-1: new low speed USB device using uhci_hcd and address 2
[45801.895017] input: USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input11
[45801.895387] generic-usb 0003:15D9:0A41.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.1-1/input0
[45801.897020] usbcore: registered new interface driver usbhid
[45801.897025] usbhid: USB HID core driver
[101978.743373] wlan0: deauthenticating from 00:25:3c:7f:a1:a9 by local choice (reason=3)
[101978.840160] cfg80211: All devices are disconnected, going to restore regulatory settings
[101978.840169] cfg80211: Restoring regulatory settings
[101978.840177] cfg80211: Calling CRDA to update world regulatory domain
[101978.848371] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[101978.848381] cfg80211: World regulatory domain updated:
[101978.848386] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[101978.848391] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[101978.848396] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[101978.848400] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[101978.848404] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[101978.848409] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[101980.167889] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[101983.012597] PM: Syncing filesystems ... done.
[101983.027600] PM: Preparing system for mem sleep
[101983.358090] Freezing user space processes ... (elapsed 0.01 seconds) done.
[101983.372092] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[101983.388084] PM: Entering mem sleep
[101983.388127] Suspending console(s) (use no_console_suspend to debug)
[101983.392332] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[101983.392463] sd 0:0:0:0: [sda] Stopping disk
[101983.474681] i8042 aux 00:08: wake-up capability disabled by ACPI
[101983.479374] i8042 kbd 00:07: wake-up capability enabled by ACPI
[101983.479526] ehci_hcd 0000:00:1d.7: PCI INT B disabled
[101983.479547] uhci_hcd 0000:00:1d.2: PCI INT D disabled
[101983.479563] uhci_hcd 0000:00:1d.1: PCI INT C disabled
[101983.479579] uhci_hcd 0000:00:1d.0: PCI INT B disabled
[101983.479845] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[101983.479863] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[101983.479884] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[101983.492036] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[101983.684109] HDA Intel 0000:00:1b.0: PCI INT A disabled
[101983.684165] ACPI handle has no context!
[101983.700025] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 220.393 msecs
[101983.897674] PM: suspend of drv:sd dev:0:0:0:0 complete after 505.347 msecs
[101983.897692] PM: suspend of drv:scsi dev:target0:0:0 complete after 505.208 msecs
[101983.897709] PM: suspend of drv:scsi dev:host0 complete after 505.048 msecs
[101983.912026] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 432.546 msecs
[101983.912050] PM: suspend of drv: dev:pci0000:00 complete after 432.056 msecs
[101983.912065] PM: suspend of devices complete after 523.320 msecs
[101983.912069] PM: suspend devices took 0.524 seconds
[101983.928136] r8169 0000:01:00.0: PME# enabled
[101983.948033] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[101983.996940] PM: late suspend of devices complete after 84.872 msecs
[101983.997105] ACPI: Preparing to enter system sleep state S3
[101984.084134] PM: Saving platform NVS memory
[101984.088796] Disabling non-boot CPUs ...
[101984.196069] CPU 1 is now offline
[101984.196522] Back to C!
[101984.196522] PM: Restoring platform NVS memory
[101984.196522] Enabling non-boot CPUs ...
[101984.196522] Booting Node 0 Processor 1 APIC 0x1
[101984.093226] Initializing CPU#1
[101984.292828] Switched to NOHz mode on CPU #1
[101984.315414] CPU1 is up
[101984.316427] ACPI: Waking up from system sleep state S3
[101984.456316] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[101984.456327] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[101984.456410] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[101984.456458] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[101984.456505] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[101984.456560] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[101984.456619] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[101984.456628] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[101984.456684] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[101984.456693] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[101984.456770] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[101984.456779] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[101984.456851] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[101984.456899] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[101984.456946] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[101984.457000] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[101984.457042] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[101984.457049] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[101984.457056] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[101984.457070] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[101984.457178] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[101984.457260] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[101984.457287] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004)
[101984.457378] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[101984.458142] PM: early resume of devices complete after 1.976 msecs
[101984.458234] i915 0000:00:02.0: setting latency timer to 64
[101984.458329] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[101984.458338] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[101984.458367] usb usb3: root hub lost power or was reset
[101984.458385] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[101984.458394] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[101984.458420] usb usb4: root hub lost power or was reset
[101984.458437] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[101984.458446] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[101984.458490] usb usb5: root hub lost power or was reset
[101984.458512] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18
[101984.458525] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[101984.458588] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[101984.458597] HDA Intel 0000:00:1b.0: setting latency timer to 64
[101984.458652] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[101984.458715] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[101984.458723] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[101984.458750] usb usb6: root hub lost power or was reset
[101984.458767] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[101984.458775] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[101984.458812] usb usb7: root hub lost power or was reset
[101984.458834] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17
[101984.458845] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[101984.458871] usb usb8: root hub lost power or was reset
[101984.458889] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[101984.458898] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[101984.458959] pci 0000:00:1e.0: setting latency timer to 64
[101984.458981] ahci 0000:00:1f.2: setting latency timer to 64
[101984.460157] sd 0:0:0:0: [sda] Starting disk
[101984.552770] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[101984.552781] r8169 0000:01:00.0: PME# disabled
[101984.563020] PM: resume of drv:button dev:PNP0C0D:00 complete after 103.775 msecs
[101984.576076] PM: resume of drv:usb dev:usb3 complete after 116.772 msecs
[101984.576104] PM: resume of drv:hub dev:3-0:1.0 complete after 116.768 msecs
[101984.576110] PM: resume of drv:usb dev:usb4 complete after 116.703 msecs
[101984.576118] PM: resume of drv: dev:ep_00 complete after 116.735 msecs
[101984.576126] PM: resume of drv: dev:ep_81 complete after 116.768 msecs
[101984.576140] PM: resume of drv:usb dev:usb5 complete after 116.633 msecs
[101984.576148] PM: resume of drv: dev:ep_00 complete after 116.665 msecs
[101984.576164] PM: resume of drv: dev:ep_00 complete after 116.581 msecs
[101984.576168] PM: resume of drv:usb dev:usb6 complete after 116.562 msecs
[101984.576179] PM: resume of drv:hub dev:5-0:1.0 complete after 116.644 msecs
[101984.576190] PM: resume of drv: dev:ep_81 complete after 116.631 msecs
[101984.576205] PM: resume of drv: dev:ep_00 complete after 116.520 msecs
[101984.576221] PM: resume of drv:hub dev:6-0:1.0 complete after 116.585 msecs
[101984.576226] PM: resume of drv:usb dev:usb8 complete after 116.407 msecs
[101984.576232] PM: resume of drv: dev:ep_81 complete after 116.571 msecs
[101984.576238] PM: resume of drv:hub dev:4-0:1.0 complete after 116.804 msecs
[101984.576248] PM: resume of drv: dev:ep_00 complete after 116.356 msecs
[101984.576252] PM: resume of drv:hub dev:8-0:1.0 complete after 116.408 msecs
[101984.576264] PM: resume of drv: dev:ep_81 complete after 116.805 msecs
[101984.576268] PM: resume of drv: dev:ep_81 complete after 116.400 msecs
[101984.580670] PM: resume of drv:i915 dev:0000:00:02.0 complete after 122.443 msecs
[101984.588091] PM: resume of drv:usb dev:usb1 complete after 128.988 msecs
[101984.588117] PM: resume of drv:hub dev:1-0:1.0 complete after 128.969 msecs
[101984.588138] PM: resume of drv: dev:ep_00 complete after 128.980 msecs
[101984.588151] PM: resume of drv: dev:ep_81 complete after 128.998 msecs
[101984.604063] PM: resume of drv:usb dev:usb2 complete after 144.901 msecs
[101984.604089] PM: resume of drv: dev:ep_00 complete after 144.814 msecs
[101984.604093] PM: resume of drv:hub dev:2-0:1.0 complete after 144.921 msecs
[101984.604118] PM: resume of drv: dev:ep_81 complete after 144.945 msecs
[101984.680087] PM: resume of drv:usb dev:usb7 complete after 220.375 msecs
[101984.680112] PM: resume of drv: dev:ep_00 complete after 220.322 msecs
[101984.680158] PM: resume of drv:hub dev:7-0:1.0 complete after 220.369 msecs
[101984.680181] PM: resume of drv: dev:ep_81 complete after 220.416 msecs
[101984.700087] usb 1-5: reset high speed USB device using ehci_hcd and address 3
[101984.776107] ata6: SATA link down (SStatus 0 SControl 300)
[101984.780109] ata5: SATA link down (SStatus 0 SControl 300)
[101984.791362] PM: resume of drv:battery dev:PNP0C0A:00 complete after 228.261 msecs
[101984.799537] i8042 kbd 00:07: wake-up capability disabled by ACPI
[101984.879786] PM: resume of drv:usb dev:1-5 complete after 419.548 msecs
[101984.879809] PM: resume of drv: dev:ep_00 complete after 419.476 msecs
[101984.879813] PM: resume of drv:uvcvideo dev:1-5:1.0 complete after 419.549 msecs
[101984.879821] PM: resume of drv:uvcvideo dev:1-5:1.1 complete after 419.513 msecs
[101984.879824] PM: resume of drv: dev:ep_83 complete after 419.540 msecs
[101984.944068] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[101984.968058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[101984.972673] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[101984.977921] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[101984.977926] ata2.00: configured for UDMA/100
[101985.083786] PM: resume of drv:usb dev:1-3 complete after 623.827 msecs
[101985.083811] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 623.827 msecs
[101985.083815] PM: resume of drv: dev:ep_00 complete after 623.687 msecs
[101985.083827] PM: resume of drv: dev:ep_01 complete after 623.752 msecs
[101985.083830] PM: resume of drv:scsi dev:host6 complete after 623.457 msecs
[101985.083832] PM: resume of drv: dev:ep_82 complete after 623.732 msecs
[101985.083838] PM: resume of drv:scsi_host dev:host6 complete after 623.443 msecs
[101985.083841] PM: resume of drv:scsi dev:target6:0:0 complete after 623.420 msecs
[101985.083854] PM: resume of drv:sd dev:6:0:0:0 complete after 623.408 msecs
[101985.083873] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 623.402 msecs
[101985.336065] usb 7-1: reset low speed USB device using uhci_hcd and address 2
[101985.644336] PM: resume of drv:usb dev:7-1 complete after 1183.840 msecs
[101985.644358] PM: resume of drv: dev:ep_00 complete after 1183.784 msecs
[101985.644362] PM: resume of drv:usbhid dev:7-1:1.0 complete after 1183.834 msecs
[101985.644374] PM: resume of drv: dev:ep_81 complete after 1183.824 msecs
[101987.372075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[101987.373488] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[101987.378294] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[101987.378574] ata1.00: configured for UDMA/100
[101987.409356] PM: resume of drv:sd dev:0:0:0:0 complete after 2949.202 msecs
[101987.409370] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2949.157 msecs
[101987.409381] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2591.252 msecs
[101987.421175] PM: resume of devices complete after 2962.991 msecs
[101987.436292] PM: resume devices took 2.980 seconds
[101987.436331] PM: Finishing wakeup.
[101987.436332] Restarting tasks ... done.
[101987.459022] video LNXVIDEO:00: Restoring backlight state
[101987.792519] r8169 0000:01:00.0: eth0: link down
[101987.793085] ADDRCONF(NETDEV_UP): eth0: link is not ready
[101987.810690] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[101989.529270] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[101989.754751] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[101989.755987] wlan0: authenticated
[101989.756080] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[101989.758031] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=2)
[101989.758036] wlan0: associated
[101989.758795] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[101989.758912] cfg80211: Calling CRDA for country: US
[101989.765362] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[101989.765367] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765370] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[101989.765373] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765375] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[101989.765378] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765381] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[101989.765383] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765386] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[101989.765389] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765391] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[101989.765394] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765397] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[101989.765400] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765402] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[101989.765405] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765408] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[101989.765411] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765413] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[101989.765416] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765418] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[101989.765421] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[101989.765424] cfg80211: Disabling freq 2467 MHz
[101989.765425] cfg80211: Disabling freq 2472 MHz
[101989.765427] cfg80211: Disabling freq 2484 MHz
[101989.765431] cfg80211: Regulatory domain changed to country: US
[101989.765433] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[101989.765436] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[101989.765439] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[101989.765442] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[101989.765444] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[101989.765447] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[101989.765450] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[102000.352028] wlan0: no IPv6 routers present
[117971.388037] usb 2-5: new high speed USB device using ehci_hcd and address 3
[117971.525505] scsi7 : usb-storage 2-5:1.0
[117972.559530] scsi 7:0:0:0: Direct-Access WD 1600JB External 0107 PQ: 0 ANSI: 0
[117972.562508] sd 7:0:0:0: Attached scsi generic sg3 type 0
[117972.563138] sd 7:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[117972.563876] sd 7:0:0:0: [sdc] Write Protect is off
[117972.563881] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[117972.564627] sd 7:0:0:0: [sdc] No Caching mode page present
[117972.564631] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[117972.567870] sd 7:0:0:0: [sdc] No Caching mode page present
[117972.567875] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[117972.571589] sdc: sdc1
[117972.574250] sd 7:0:0:0: [sdc] No Caching mode page present
[117972.574257] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[117972.574261] sd 7:0:0:0: [sdc] Attached SCSI disk
[212532.596398] usb 2-5: USB disconnect, address 3
[212532.876052] usb 2-5: new high speed USB device using ehci_hcd and address 4
[212533.014786] scsi8 : usb-storage 2-5:1.0
[212534.047662] scsi 8:0:0:0: Direct-Access WD 1600JB External 0107 PQ: 0 ANSI: 0
[212534.048857] sd 8:0:0:0: Attached scsi generic sg3 type 0
[212534.054029] sd 8:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[212534.054886] sd 8:0:0:0: [sdc] Write Protect is off
[212534.054894] sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
[212534.055753] sd 8:0:0:0: [sdc] No Caching mode page present
[212534.055760] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[212534.058757] sd 8:0:0:0: [sdc] No Caching mode page present
[212534.058765] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[212538.294626] sdc: sdc1
[212538.299375] sd 8:0:0:0: [sdc] No Caching mode page present
[212538.299383] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[212538.299389] sd 8:0:0:0: [sdc] Attached SCSI disk
[220261.348307] usb 2-5: USB disconnect, address 4
[220262.856064] usb 7-1: USB disconnect, address 2
[220290.647226] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[222558.410364] wlan0: deauthenticating from 00:25:3c:7f:a1:a9 by local choice (reason=3)
[222558.472127] cfg80211: All devices are disconnected, going to restore regulatory settings
[222558.472133] cfg80211: Restoring regulatory settings
[222558.472138] cfg80211: Calling CRDA to update world regulatory domain
[222558.531767] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[222558.531774] cfg80211: World regulatory domain updated:
[222558.531776] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[222558.531779] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222558.531782] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[222558.531785] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[222558.531788] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222558.531791] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222559.938442] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[222561.197704] PM: Syncing filesystems ... done.
[222561.208146] PM: Preparing system for mem sleep
[222561.683978] Freezing user space processes ... (elapsed 0.01 seconds) done.
[222561.700066] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[222561.716061] PM: Entering mem sleep
[222561.716092] Suspending console(s) (use no_console_suspend to debug)
[222561.716847] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[222561.716969] sd 0:0:0:0: [sda] Stopping disk
[222561.791889] i8042 aux 00:08: wake-up capability disabled by ACPI
[222561.794801] i8042 kbd 00:07: wake-up capability enabled by ACPI
[222561.794922] ehci_hcd 0000:00:1d.7: PCI INT B disabled
[222561.794936] uhci_hcd 0000:00:1d.2: PCI INT D disabled
[222561.794948] uhci_hcd 0000:00:1d.1: PCI INT C disabled
[222561.794960] uhci_hcd 0000:00:1d.0: PCI INT B disabled
[222561.795178] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[222561.795192] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[222561.795202] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[222561.808029] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[222561.896372] HDA Intel 0000:00:1b.0: PCI INT A disabled
[222561.896413] ACPI handle has no context!
[222561.912016] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 117.040 msecs
[222562.220145] PM: suspend of drv:sd dev:0:0:0:0 complete after 503.301 msecs
[222562.220159] PM: suspend of drv:scsi dev:target0:0:0 complete after 503.259 msecs
[222562.220172] PM: suspend of drv:scsi dev:host0 complete after 503.090 msecs
[222562.236020] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 441.135 msecs
[222562.236039] PM: suspend of drv: dev:pci0000:00 complete after 440.758 msecs
[222562.236048] PM: suspend of devices complete after 519.523 msecs
[222562.236051] PM: suspend devices took 0.520 seconds
[222562.252109] r8169 0000:01:00.0: PME# enabled
[222562.272023] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[222562.320345] PM: late suspend of devices complete after 84.289 msecs
[222562.320462] ACPI: Preparing to enter system sleep state S3
[222562.408091] PM: Saving platform NVS memory
[222562.410429] Disabling non-boot CPUs ...
[222562.516045] CPU 1 is now offline
[222562.516413] Back to C!
[222562.516413] PM: Restoring platform NVS memory
[222562.516413] Enabling non-boot CPUs ...
[222562.516413] Booting Node 0 Processor 1 APIC 0x1
[222562.413211] Initializing CPU#1
[222562.612739] Switched to NOHz mode on CPU #1
[222562.627899] CPU1 is up
[222562.629478] ACPI: Waking up from system sleep state S3
[222562.772280] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[222562.772288] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[222562.772355] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[222562.772395] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[222562.772434] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[222562.772480] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[222562.772530] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[222562.772536] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[222562.772584] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[222562.772591] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[222562.772656] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[222562.772662] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[222562.772724] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[222562.772763] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[222562.772802] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[222562.772848] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[222562.772883] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[222562.772888] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[222562.772893] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[222562.772905] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[222562.772997] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[222562.773067] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[222562.773090] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004)
[222562.773172] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[222562.773860] PM: early resume of devices complete after 1.711 msecs
[222562.773940] i915 0000:00:02.0: setting latency timer to 64
[222562.774034] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[222562.774041] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[222562.774068] usb usb3: root hub lost power or was reset
[222562.774083] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[222562.774089] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[222562.774115] usb usb4: root hub lost power or was reset
[222562.774129] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[222562.774135] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[222562.774160] usb usb5: root hub lost power or was reset
[222562.774176] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18
[222562.774183] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[222562.774233] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[222562.774240] HDA Intel 0000:00:1b.0: setting latency timer to 64
[222562.774288] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[222562.774339] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[222562.774345] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[222562.774371] usb usb6: root hub lost power or was reset
[222562.774384] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[222562.774391] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[222562.774416] usb usb7: root hub lost power or was reset
[222562.774429] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17
[222562.774436] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[222562.774460] usb usb8: root hub lost power or was reset
[222562.774474] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[222562.774481] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[222562.774529] pci 0000:00:1e.0: setting latency timer to 64
[222562.774548] ahci 0000:00:1f.2: setting latency timer to 64
[222562.775667] sd 0:0:0:0: [sda] Starting disk
[222562.857832] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[222562.857841] r8169 0000:01:00.0: PME# disabled
[222562.887827] PM: resume of drv:i915 dev:0000:00:02.0 complete after 113.892 msecs
[222562.892058] PM: resume of drv:usb dev:usb3 complete after 117.176 msecs
[222562.892081] PM: resume of drv:hub dev:3-0:1.0 complete after 117.168 msecs
[222562.892084] PM: resume of drv:usb dev:usb4 complete after 117.095 msecs
[222562.892091] PM: resume of drv: dev:ep_00 complete after 117.127 msecs
[222562.892097] PM: resume of drv: dev:ep_81 complete after 117.159 msecs
[222562.892108] PM: resume of drv:usb dev:usb5 complete after 117.017 msecs
[222562.892116] PM: resume of drv: dev:ep_00 complete after 117.049 msecs
[222562.892127] PM: resume of drv: dev:ep_00 complete after 116.959 msecs
[222562.892133] PM: resume of drv:usb dev:usb6 complete after 116.940 msecs
[222562.892138] PM: resume of drv:hub dev:5-0:1.0 complete after 117.019 msecs
[222562.892146] PM: resume of drv: dev:ep_81 complete after 117.002 msecs
[222562.892155] PM: resume of drv:usb dev:usb7 complete after 116.859 msecs
[222562.892157] PM: resume of drv: dev:ep_00 complete after 116.889 msecs
[222562.892169] PM: resume of drv: dev:ep_00 complete after 116.796 msecs
[222562.892176] PM: resume of drv:usb dev:usb8 complete after 116.778 msecs
[222562.892179] PM: resume of drv:hub dev:7-0:1.0 complete after 116.855 msecs
[222562.892186] PM: resume of drv:hub dev:4-0:1.0 complete after 117.170 msecs
[222562.892188] PM: resume of drv: dev:ep_81 complete after 116.839 msecs
[222562.892193] PM: resume of drv:hub dev:6-0:1.0 complete after 116.973 msecs
[222562.892200] PM: resume of drv: dev:ep_81 complete after 117.159 msecs
[222562.892202] PM: resume of drv:hub dev:8-0:1.0 complete after 116.777 msecs
[222562.892211] PM: resume of drv: dev:ep_81 complete after 116.966 msecs
[222562.892213] PM: resume of drv: dev:ep_00 complete after 116.739 msecs
[222562.892222] PM: resume of drv: dev:ep_81 complete after 116.771 msecs
[222562.904063] PM: resume of drv:usb dev:usb1 complete after 129.318 msecs
[222562.904080] PM: resume of drv:hub dev:1-0:1.0 complete after 129.327 msecs
[222562.904093] PM: resume of drv: dev:ep_00 complete after 129.328 msecs
[222562.904106] PM: resume of drv: dev:ep_81 complete after 129.344 msecs
[222563.016059] usb 1-5: reset high speed USB device using ehci_hcd and address 3
[222563.094380] PM: resume of drv:battery dev:PNP0C0A:00 complete after 222.933 msecs
[222563.100066] ata6: SATA link down (SStatus 0 SControl 300)
[222563.102579] i8042 kbd 00:07: wake-up capability disabled by ACPI
[222563.108732] ata5: SATA link down (SStatus 0 SControl 300)
[222563.195805] PM: resume of drv:usb dev:1-5 complete after 420.072 msecs
[222563.195829] PM: resume of drv:uvcvideo dev:1-5:1.0 complete after 420.079 msecs
[222563.195832] PM: resume of drv: dev:ep_00 complete after 420.026 msecs
[222563.195837] PM: resume of drv:uvcvideo dev:1-5:1.1 complete after 420.052 msecs
[222563.195843] PM: resume of drv: dev:ep_83 complete after 420.076 msecs
[222563.260049] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[222563.320058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[222563.399679] PM: resume of drv:usb dev:1-3 complete after 624.144 msecs
[222563.399697] PM: resume of drv: dev:ep_00 complete after 624.063 msecs
[222563.399701] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 624.139 msecs
[222563.399721] PM: resume of drv: dev:ep_01 complete after 624.136 msecs
[222563.399729] PM: resume of drv:scsi dev:host6 complete after 623.891 msecs
[222563.399732] PM: resume of drv: dev:ep_82 complete after 624.123 msecs
[222563.399744] PM: resume of drv:scsi_host dev:host6 complete after 623.895 msecs
[222563.399747] PM: resume of drv:scsi dev:target6:0:0 complete after 623.877 msecs
[222563.399766] PM: resume of drv:sd dev:6:0:0:0 complete after 623.877 msecs
[222563.399784] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 623.878 msecs
[222563.434887] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[222563.440092] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[222563.440096] ata2.00: configured for UDMA/100
[222565.672075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[222565.673493] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[222565.683658] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[222565.683954] ata1.00: configured for UDMA/100
[222565.725849] PM: resume of drv:sd dev:0:0:0:0 complete after 2950.181 msecs
[222565.725872] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2950.159 msecs
[222565.725875] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2604.226 msecs
[222565.737146] PM: resume of devices complete after 2963.251 msecs
[222565.752297] PM: resume devices took 2.980 seconds
[222565.752330] PM: Finishing wakeup.
[222565.752332] Restarting tasks ... done.
[222565.809071] video LNXVIDEO:00: Restoring backlight state
[222566.207724] r8169 0000:01:00.0: eth0: link down
[222566.208703] ADDRCONF(NETDEV_UP): eth0: link is not ready
[222566.221536] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[222568.011663] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[222568.759412] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[222568.763957] wlan0: authenticated
[222568.763994] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[222568.767755] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=2)
[222568.767759] wlan0: associated
[222568.768560] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[222568.768637] cfg80211: Calling CRDA for country: US
[222568.774249] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[222568.774254] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774257] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[222568.774260] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774262] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[222568.774265] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774268] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[222568.774271] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774273] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[222568.774276] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774278] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[222568.774281] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774283] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[222568.774286] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774289] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[222568.774292] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774294] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[222568.774297] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774300] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[222568.774302] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774305] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[222568.774308] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[222568.774310] cfg80211: Disabling freq 2467 MHz
[222568.774312] cfg80211: Disabling freq 2472 MHz
[222568.774314] cfg80211: Disabling freq 2484 MHz
[222568.774318] cfg80211: Regulatory domain changed to country: US
[222568.774320] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[222568.774323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[222568.774326] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[222568.774329] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222568.774332] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222568.774334] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[222568.774337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[222578.968028] wlan0: no IPv6 routers present
[222583.688051] usb 8-1: new low speed USB device using uhci_hcd and address 2
[222583.928877] input: USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input12
[222583.929052] generic-usb 0003:15D9:0A41.0002: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.2-1/input0
[234944.957646] wlan0: deauthenticating from 00:25:3c:7f:a1:a9 by local choice (reason=3)
[234945.040150] cfg80211: All devices are disconnected, going to restore regulatory settings
[234945.040158] cfg80211: Restoring regulatory settings
[234945.040170] cfg80211: Calling CRDA to update world regulatory domain
[234945.047605] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[234945.047614] cfg80211: World regulatory domain updated:
[234945.047618] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[234945.047623] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[234945.047627] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[234945.047632] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[234945.047636] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[234945.047640] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[234946.222685] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[234949.110552] PM: Syncing filesystems ... done.
[234949.122852] PM: Preparing system for mem sleep
[234949.434232] Freezing user space processes ... (elapsed 0.01 seconds) done.
[234949.448084] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[234949.464077] PM: Entering mem sleep
[234949.464121] Suspending console(s) (use no_console_suspend to debug)
[234949.465150] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[234949.465291] sd 0:0:0:0: [sda] Stopping disk
[234949.546734] i8042 aux 00:08: wake-up capability disabled by ACPI
[234949.549677] i8042 kbd 00:07: wake-up capability enabled by ACPI
[234949.549827] ehci_hcd 0000:00:1d.7: PCI INT B disabled
[234949.549846] uhci_hcd 0000:00:1d.2: PCI INT D disabled
[234949.549860] uhci_hcd 0000:00:1d.1: PCI INT C disabled
[234949.549876] uhci_hcd 0000:00:1d.0: PCI INT B disabled
[234949.550107] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[234949.550127] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[234949.550145] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[234949.564034] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[234949.652374] HDA Intel 0000:00:1b.0: PCI INT A disabled
[234949.652422] ACPI handle has no context!
[234949.668026] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 118.116 msecs
[234949.965738] PM: suspend of drv:sd dev:0:0:0:0 complete after 500.593 msecs
[234949.965754] PM: suspend of drv:scsi dev:target0:0:0 complete after 500.439 msecs
[234949.965776] PM: suspend of drv:scsi dev:host0 complete after 500.304 msecs
[234949.980024] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 430.244 msecs
[234949.980050] PM: suspend of drv: dev:pci0000:00 complete after 429.777 msecs
[234949.980064] PM: suspend of devices complete after 515.330 msecs
[234949.980068] PM: suspend devices took 0.516 seconds
[234949.996125] r8169 0000:01:00.0: PME# enabled
[234950.016030] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[234950.064717] PM: late suspend of devices complete after 84.643 msecs
[234950.064882] ACPI: Preparing to enter system sleep state S3
[234950.152111] PM: Saving platform NVS memory
[234950.153801] Disabling non-boot CPUs ...
[234950.260053] CPU 1 is now offline
[234950.260486] Back to C!
[234950.260486] PM: Restoring platform NVS memory
[234950.260486] Enabling non-boot CPUs ...
[234950.260486] Booting Node 0 Processor 1 APIC 0x1
[234950.157226] Initializing CPU#1
[234950.356828] Switched to NOHz mode on CPU #1
[234950.370948] CPU1 is up
[234950.371942] ACPI: Waking up from system sleep state S3
[234950.512313] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[234950.512325] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[234950.512408] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[234950.512455] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[234950.512502] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[234950.512557] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[234950.512616] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[234950.512625] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[234950.512682] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[234950.512690] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[234950.512767] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[234950.512776] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[234950.512848] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[234950.512896] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[234950.512942] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[234950.512996] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[234950.513038] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[234950.513045] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[234950.513052] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[234950.513067] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[234950.513174] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[234950.513256] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[234950.513283] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004)
[234950.513375] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[234950.514139] PM: early resume of devices complete after 1.974 msecs
[234950.514230] i915 0000:00:02.0: setting latency timer to 64
[234950.514323] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[234950.514332] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[234950.514361] usb usb3: root hub lost power or was reset
[234950.514379] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[234950.514387] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[234950.514414] usb usb4: root hub lost power or was reset
[234950.514431] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[234950.514439] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[234950.514467] usb usb5: root hub lost power or was reset
[234950.514485] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18
[234950.514494] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[234950.514556] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[234950.514564] HDA Intel 0000:00:1b.0: setting latency timer to 64
[234950.514620] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[234950.514697] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[234950.514709] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[234950.514739] usb usb6: root hub lost power or was reset
[234950.514756] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[234950.514764] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[234950.514790] usb usb7: root hub lost power or was reset
[234950.514807] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17
[234950.514815] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[234950.514842] usb usb8: root hub lost power or was reset
[234950.514860] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[234950.514869] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[234950.514927] pci 0000:00:1e.0: setting latency timer to 64
[234950.514950] ahci 0000:00:1f.2: setting latency timer to 64
[234950.516240] sd 0:0:0:0: [sda] Starting disk
[234950.603816] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[234950.603828] r8169 0000:01:00.0: PME# disabled
[234950.632111] PM: resume of drv:usb dev:usb7 complete after 116.308 msecs
[234950.632126] PM: resume of drv:hub dev:7-0:1.0 complete after 116.297 msecs
[234950.632141] PM: resume of drv: dev:ep_00 complete after 116.263 msecs
[234950.632145] PM: resume of drv: dev:ep_81 complete after 116.290 msecs
[234950.632177] PM: resume of drv:usb dev:usb6 complete after 116.477 msecs
[234950.632181] PM: resume of drv:usb dev:usb5 complete after 116.581 msecs
[234950.632191] PM: resume of drv:hub dev:6-0:1.0 complete after 116.465 msecs
[234950.632195] PM: resume of drv:hub dev:5-0:1.0 complete after 116.567 msecs
[234950.632202] PM: resume of drv: dev:ep_00 complete after 116.426 msecs
[234950.632206] PM: resume of drv: dev:ep_00 complete after 116.530 msecs
[234950.632210] PM: resume of drv: dev:ep_81 complete after 116.459 msecs
[234950.632214] PM: resume of drv: dev:ep_81 complete after 116.563 msecs
[234950.632246] PM: resume of drv:usb dev:usb4 complete after 116.748 msecs
[234950.632251] PM: resume of drv:usb dev:usb3 complete after 116.851 msecs
[234950.632261] PM: resume of drv:hub dev:4-0:1.0 complete after 116.734 msecs
[234950.632265] PM: resume of drv: dev:ep_00 complete after 116.690 msecs
[234950.632271] PM: resume of drv: dev:ep_81 complete after 116.720 msecs
[234950.632275] PM: resume of drv:hub dev:3-0:1.0 complete after 116.847 msecs
[234950.632287] PM: resume of drv: dev:ep_00 complete after 116.813 msecs
[234950.632291] PM: resume of drv: dev:ep_81 complete after 116.839 msecs
[234950.632602] PM: resume of drv:i915 dev:0000:00:02.0 complete after 118.380 msecs
[234950.644055] PM: resume of drv:usb dev:usb1 complete after 128.787 msecs
[234950.644089] PM: resume of drv:hub dev:1-0:1.0 complete after 128.813 msecs
[234950.644103] PM: resume of drv: dev:ep_00 complete after 128.818 msecs
[234950.644107] PM: resume of drv: dev:ep_81 complete after 128.827 msecs
[234950.660070] PM: resume of drv:usb dev:usb2 complete after 144.779 msecs
[234950.660097] PM: resume of drv: dev:ep_00 complete after 144.725 msecs
[234950.660102] PM: resume of drv:hub dev:2-0:1.0 complete after 144.801 msecs
[234950.660129] PM: resume of drv: dev:ep_81 complete after 144.784 msecs
[234950.736107] PM: resume of drv:usb dev:usb8 complete after 220.206 msecs
[234950.736126] PM: resume of drv:hub dev:8-0:1.0 complete after 220.197 msecs
[234950.736138] PM: resume of drv: dev:ep_00 complete after 220.163 msecs
[234950.736150] PM: resume of drv: dev:ep_81 complete after 220.199 msecs
[234950.756090] usb 1-5: reset high speed USB device using ehci_hcd and address 3
[234950.823865] PM: resume of drv:battery dev:PNP0C0A:00 complete after 208.118 msecs
[234950.832049] ata5: SATA link down (SStatus 0 SControl 300)
[234950.840082] ata6: SATA link down (SStatus 0 SControl 300)
[234950.840098] i8042 kbd 00:07: wake-up capability disabled by ACPI
[234950.935700] PM: resume of drv:usb dev:1-5 complete after 419.381 msecs
[234950.935725] PM: resume of drv: dev:ep_00 complete after 419.308 msecs
[234950.935728] PM: resume of drv:uvcvideo dev:1-5:1.0 complete after 419.382 msecs
[234950.935736] PM: resume of drv:uvcvideo dev:1-5:1.1 complete after 419.344 msecs
[234950.935739] PM: resume of drv: dev:ep_83 complete after 419.371 msecs
[234951.000069] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[234951.028058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[234951.032677] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[234951.037916] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[234951.037921] ata2.00: configured for UDMA/100
[234951.139451] PM: resume of drv:usb dev:1-3 complete after 623.344 msecs
[234951.139476] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 623.342 msecs
[234951.139479] PM: resume of drv: dev:ep_00 complete after 623.268 msecs
[234951.139492] PM: resume of drv: dev:ep_01 complete after 623.333 msecs
[234951.139495] PM: resume of drv:scsi dev:host6 complete after 623.039 msecs
[234951.139497] PM: resume of drv: dev:ep_82 complete after 623.314 msecs
[234951.139503] PM: resume of drv:scsi_host dev:host6 complete after 623.026 msecs
[234951.139506] PM: resume of drv:scsi dev:target6:0:0 complete after 623.003 msecs
[234951.139524] PM: resume of drv:sd dev:6:0:0:0 complete after 622.998 msecs
[234951.139543] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 622.993 msecs
[234951.392064] usb 8-1: reset low speed USB device using uhci_hcd and address 2
[234951.699930] PM: resume of drv:usb dev:8-1 complete after 1183.355 msecs
[234951.699950] PM: resume of drv:usbhid dev:8-1:1.0 complete after 1183.351 msecs
[234951.699953] PM: resume of drv: dev:ep_00 complete after 1183.303 msecs
[234951.699958] PM: resume of drv: dev:ep_81 complete after 1183.336 msecs
[234953.308073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[234953.309488] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[234953.316986] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[234953.317281] ata1.00: configured for UDMA/100
[234953.348048] PM: resume of drv:sd dev:0:0:0:0 complete after 2831.810 msecs
[234953.348071] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2831.777 msecs
[234953.348074] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2489.060 msecs
[234953.360355] PM: resume of devices complete after 2846.175 msecs
[234953.376304] PM: resume devices took 2.864 seconds
[234953.376337] PM: Finishing wakeup.
[234953.376339] Restarting tasks ... done.
[234953.455982] video LNXVIDEO:00: Restoring backlight state
[234953.846973] r8169 0000:01:00.0: eth0: link down
[234953.847207] ADDRCONF(NETDEV_UP): eth0: link is not ready
[234953.865084] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[234955.402462] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[234955.764630] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[234955.765960] wlan0: authenticated
[234955.766023] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[234955.767836] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=2)
[234955.767840] wlan0: associated
[234955.768663] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[234955.768757] cfg80211: Calling CRDA for country: US
[234955.774779] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[234955.774784] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774787] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[234955.774790] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774793] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[234955.774796] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774798] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[234955.774801] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774804] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[234955.774807] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774809] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[234955.774812] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774814] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[234955.774817] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774820] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[234955.774822] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774825] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[234955.774828] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774830] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[234955.774833] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774835] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[234955.774838] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[234955.774840] cfg80211: Disabling freq 2467 MHz
[234955.774842] cfg80211: Disabling freq 2472 MHz
[234955.774844] cfg80211: Disabling freq 2484 MHz
[234955.774848] cfg80211: Regulatory domain changed to country: US
[234955.774850] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[234955.774853] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[234955.774856] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[234955.774859] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[234955.774861] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[234955.774864] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[234955.774867] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[234965.856028] wlan0: no IPv6 routers present
[241633.221131] wlan0: deauthenticating from 00:25:3c:7f:a1:a9 by local choice (reason=3)
[241633.300151] cfg80211: All devices are disconnected, going to restore regulatory settings
[241633.300161] cfg80211: Restoring regulatory settings
[241633.300177] cfg80211: Calling CRDA to update world regulatory domain
[241633.308382] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[241633.308392] cfg80211: World regulatory domain updated:
[241633.308395] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[241633.308400] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[241633.308405] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[241633.308409] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[241633.308414] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[241633.308418] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[241634.421759] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[241638.036318] PM: Syncing filesystems ... done.
[241638.066311] PM: Preparing system for mem sleep
[241639.422607] Freezing user space processes ... (elapsed 0.01 seconds) done.
[241639.436067] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[241639.452058] PM: Entering mem sleep
[241639.452107] Suspending console(s) (use no_console_suspend to debug)
[241639.453119] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[241639.528475] i8042 aux 00:08: wake-up capability disabled by ACPI
[241639.531576] i8042 kbd 00:07: wake-up capability enabled by ACPI
[241639.531712] ehci_hcd 0000:00:1d.7: PCI INT B disabled
[241639.531729] uhci_hcd 0000:00:1d.2: PCI INT D disabled
[241639.531746] uhci_hcd 0000:00:1d.1: PCI INT C disabled
[241639.531760] uhci_hcd 0000:00:1d.0: PCI INT B disabled
[241639.532036] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[241639.532057] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[241639.532075] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[241639.544032] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[241639.570565] sd 0:0:0:0: [sda] Stopping disk
[241639.570790] PM: suspend of drv:sd dev:0:0:0:0 complete after 117.674 msecs
[241639.570806] PM: suspend of drv:scsi dev:target0:0:0 complete after 117.640 msecs
[241639.570822] PM: suspend of drv:scsi dev:host0 complete after 117.513 msecs
[241639.636388] HDA Intel 0000:00:1b.0: PCI INT A disabled
[241639.636437] ACPI handle has no context!
[241639.652019] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 120.237 msecs
[241639.652050] PM: suspend of drv: dev:pci0000:00 complete after 119.381 msecs
[241639.652064] PM: suspend of devices complete after 199.364 msecs
[241639.652069] PM: suspend devices took 0.200 seconds
[241639.668123] r8169 0000:01:00.0: PME# enabled
[241639.688030] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[241639.736723] PM: late suspend of devices complete after 84.646 msecs
[241639.736888] ACPI: Preparing to enter system sleep state S3
[241639.824111] PM: Saving platform NVS memory
[241639.831593] Disabling non-boot CPUs ...
[241639.936053] CPU 1 is now offline
[241639.936491] Back to C!
[241639.936491] PM: Restoring platform NVS memory
[241639.936491] Enabling non-boot CPUs ...
[241639.936491] Booting Node 0 Processor 1 APIC 0x1
[241639.833226] Initializing CPU#1
[241640.032827] Switched to NOHz mode on CPU #1
[241640.047912] CPU1 is up
[241640.049633] ACPI: Waking up from system sleep state S3
[241640.192355] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[241640.192367] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[241640.192450] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[241640.192498] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[241640.192545] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[241640.192600] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[241640.192660] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[241640.192669] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[241640.192725] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[241640.192734] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[241640.192811] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[241640.192820] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[241640.192893] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[241640.192940] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[241640.192987] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[241640.193041] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[241640.193082] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[241640.193089] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[241640.193096] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[241640.193111] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[241640.193218] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[241640.193301] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[241640.193328] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004)
[241640.193420] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[241640.194183] PM: early resume of devices complete after 1.976 msecs
[241640.194275] i915 0000:00:02.0: setting latency timer to 64
[241640.194369] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[241640.194378] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[241640.194407] usb usb3: root hub lost power or was reset
[241640.194425] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[241640.194434] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[241640.194461] usb usb4: root hub lost power or was reset
[241640.194477] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[241640.194485] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[241640.194513] usb usb5: root hub lost power or was reset
[241640.194532] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18
[241640.194540] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[241640.194601] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[241640.194610] HDA Intel 0000:00:1b.0: setting latency timer to 64
[241640.194666] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[241640.194752] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[241640.194760] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[241640.194787] usb usb6: root hub lost power or was reset
[241640.194803] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[241640.194811] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[241640.194838] usb usb7: root hub lost power or was reset
[241640.194854] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17
[241640.194863] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[241640.194890] usb usb8: root hub lost power or was reset
[241640.194909] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[241640.194917] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[241640.194974] pci 0000:00:1e.0: setting latency timer to 64
[241640.194998] ahci 0000:00:1f.2: setting latency timer to 64
[241640.196234] sd 0:0:0:0: [sda] Starting disk
[241640.312079] PM: resume of drv:usb dev:usb6 complete after 116.376 msecs
[241640.312096] PM: resume of drv:hub dev:6-0:1.0 complete after 116.371 msecs
[241640.312106] PM: resume of drv: dev:ep_00 complete after 116.336 msecs
[241640.312115] PM: resume of drv: dev:ep_81 complete after 116.368 msecs
[241640.312138] PM: resume of drv:usb dev:usb7 complete after 116.343 msecs
[241640.312149] PM: resume of drv:hub dev:7-0:1.0 complete after 116.327 msecs
[241640.312159] PM: resume of drv: dev:ep_00 complete after 116.289 msecs
[241640.312167] PM: resume of drv: dev:ep_81 complete after 116.321 msecs
[241640.312212] PM: resume of drv:usb dev:usb5 complete after 116.615 msecs
[241640.312224] PM: resume of drv:hub dev:5-0:1.0 complete after 116.599 msecs
[241640.312234] PM: resume of drv: dev:ep_00 complete after 116.561 msecs
[241640.312241] PM: resume of drv: dev:ep_81 complete after 116.593 msecs
[241640.312264] PM: resume of drv:usb dev:usb4 complete after 116.766 msecs
[241640.312276] PM: resume of drv:hub dev:4-0:1.0 complete after 116.750 msecs
[241640.312285] PM: resume of drv: dev:ep_00 complete after 116.712 msecs
[241640.312293] PM: resume of drv: dev:ep_81 complete after 116.743 msecs
[241640.312316] PM: resume of drv:usb dev:usb3 complete after 116.923 msecs
[241640.312327] PM: resume of drv:hub dev:3-0:1.0 complete after 116.905 msecs
[241640.312337] PM: resume of drv: dev:ep_00 complete after 116.866 msecs
[241640.312345] PM: resume of drv: dev:ep_81 complete after 116.898 msecs
[241640.324056] PM: resume of drv:usb dev:usb1 complete after 128.770 msecs
[241640.324074] PM: resume of drv:hub dev:1-0:1.0 complete after 128.782 msecs
[241640.324083] PM: resume of drv: dev:ep_00 complete after 128.782 msecs
[241640.324119] PM: resume of drv: dev:ep_81 complete after 128.822 msecs
[241640.340073] PM: resume of drv:usb dev:usb2 complete after 144.763 msecs
[241640.340089] PM: resume of drv:hub dev:2-0:1.0 complete after 144.777 msecs
[241640.340099] PM: resume of drv: dev:ep_00 complete after 144.734 msecs
[241640.340107] PM: resume of drv: dev:ep_81 complete after 144.790 msecs
[241640.355523] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[241640.355534] r8169 0000:01:00.0: PME# disabled
[241640.358024] PM: resume of drv:r8169 dev:0000:01:00.0 complete after 162.938 msecs
[241640.371380] PM: resume of drv:button dev:PNP0C0D:00 complete after 176.158 msecs
[241640.385329] PM: resume of drv:i915 dev:0000:00:02.0 complete after 191.061 msecs
[241640.416086] PM: resume of drv:usb dev:usb8 complete after 220.189 msecs
[241640.416110] PM: resume of drv:hub dev:8-0:1.0 complete after 220.183 msecs
[241640.416114] PM: resume of drv: dev:ep_00 complete after 220.136 msecs
[241640.416122] PM: resume of drv: dev:ep_81 complete after 220.173 msecs
[241640.436128] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[241640.528091] ata5: SATA link down (SStatus 0 SControl 300)
[241640.536092] ata6: SATA link down (SStatus 0 SControl 300)
[241640.566041] PM: resume of drv:battery dev:PNP0C0A:00 complete after 194.579 msecs
[241640.575593] PM: resume of drv:usb dev:1-3 complete after 379.487 msecs
[241640.575613] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 379.479 msecs
[241640.575616] PM: resume of drv: dev:ep_00 complete after 379.410 msecs
[241640.575629] PM: resume of drv: dev:ep_01 complete after 379.473 msecs
[241640.575636] PM: resume of drv: dev:ep_82 complete after 379.456 msecs
[241640.575673] PM: resume of drv:scsi dev:host6 complete after 379.225 msecs
[241640.575692] PM: resume of drv:scsi_host dev:host6 complete after 379.219 msecs
[241640.575705] PM: resume of drv:scsi dev:target6:0:0 complete after 379.209 msecs
[241640.575718] PM: resume of drv:sd dev:6:0:0:0 complete after 379.197 msecs
[241640.575737] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 379.192 msecs
[241640.582064] i8042 kbd 00:07: wake-up capability disabled by ACPI
[241640.680071] usb 1-5: reset high speed USB device using ehci_hcd and address 3
[241640.748075] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[241640.859842] PM: resume of drv:usb dev:1-5 complete after 663.528 msecs
[241640.859868] PM: resume of drv: dev:ep_00 complete after 663.458 msecs
[241640.859871] PM: resume of drv:uvcvideo dev:1-5:1.0 complete after 663.532 msecs
[241640.859879] PM: resume of drv:uvcvideo dev:1-5:1.1 complete after 663.494 msecs
[241640.859882] PM: resume of drv: dev:ep_83 complete after 663.522 msecs
[241640.862795] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[241640.868051] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[241640.868056] ata2.00: configured for UDMA/100
[241641.072065] usb 8-1: reset low speed USB device using uhci_hcd and address 2
[241641.378927] PM: resume of drv:usb dev:8-1 complete after 1182.356 msecs
[241641.378947] PM: resume of drv:usbhid dev:8-1:1.0 complete after 1182.352 msecs
[241641.378951] PM: resume of drv: dev:ep_00 complete after 1182.304 msecs
[241641.378956] PM: resume of drv: dev:ep_81 complete after 1182.336 msecs
[241642.988075] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[241642.989500] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[241642.998028] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[241642.998324] ata1.00: configured for UDMA/100
[241643.029081] PM: resume of drv:sd dev:0:0:0:0 complete after 2832.849 msecs
[241643.029094] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2832.806 msecs
[241643.029104] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2427.380 msecs
[241643.042531] PM: resume of devices complete after 2848.306 msecs
[241643.056299] PM: resume devices took 2.864 seconds
[241643.056333] PM: Finishing wakeup.
[241643.056335] Restarting tasks ... done.
[241643.080927] video LNXVIDEO:00: Restoring backlight state
[241643.246760] r8169 0000:01:00.0: eth0: link down
[241643.246958] ADDRCONF(NETDEV_UP): eth0: link is not ready
[241643.256900] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[241644.566209] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[241645.757200] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[241645.760234] wlan0: authenticated
[241645.760272] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[241645.761907] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=2)
[241645.761913] wlan0: associated
[241645.762673] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[241645.762766] cfg80211: Calling CRDA for country: US
[241645.771435] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[241645.771441] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771444] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[241645.771447] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771450] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[241645.771453] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771456] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[241645.771458] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771461] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[241645.771464] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771467] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[241645.771470] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771472] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[241645.771475] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771478] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[241645.771481] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771483] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[241645.771486] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771488] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[241645.771491] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771494] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[241645.771497] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[241645.771499] cfg80211: Disabling freq 2467 MHz
[241645.771501] cfg80211: Disabling freq 2472 MHz
[241645.771502] cfg80211: Disabling freq 2484 MHz
[241645.771508] cfg80211: Regulatory domain changed to country: US
[241645.771510] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[241645.771513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[241645.771516] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[241645.771519] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[241645.771521] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[241645.771524] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[241645.771527] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[241656.168013] wlan0: no IPv6 routers present
[257603.957574] wlan0: deauthenticating from 00:25:3c:7f:a1:a9 by local choice (reason=3)
[257604.028099] cfg80211: All devices are disconnected, going to restore regulatory settings
[257604.028105] cfg80211: Restoring regulatory settings
[257604.028110] cfg80211: Calling CRDA to update world regulatory domain
[257604.034532] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[257604.034539] cfg80211: World regulatory domain updated:
[257604.034541] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[257604.034544] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[257604.034547] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[257604.034550] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[257604.034553] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[257604.034556] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[257604.958676] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[257607.431203] PM: Syncing filesystems ... done.
[257607.440916] PM: Preparing system for mem sleep
[257607.762040] Freezing user space processes ... (elapsed 0.01 seconds) done.
[257607.776073] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[257607.792064] PM: Entering mem sleep
[257607.792103] Suspending console(s) (use no_console_suspend to debug)
[257607.792896] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[257607.793243] sd 0:0:0:0: [sda] Stopping disk
[257607.871529] i8042 aux 00:08: wake-up capability disabled by ACPI
[257607.873988] i8042 kbd 00:07: wake-up capability enabled by ACPI
[257607.874105] ehci_hcd 0000:00:1d.7: PCI INT B disabled
[257607.874118] uhci_hcd 0000:00:1d.2: PCI INT D disabled
[257607.874131] uhci_hcd 0000:00:1d.1: PCI INT C disabled
[257607.874143] uhci_hcd 0000:00:1d.0: PCI INT B disabled
[257607.874374] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[257607.874389] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[257607.874402] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[257607.888031] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[257607.976376] HDA Intel 0000:00:1b.0: PCI INT A disabled
[257607.976417] ACPI handle has no context!
[257607.992024] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 117.863 msecs
[257608.296219] PM: suspend of drv:sd dev:0:0:0:0 complete after 503.325 msecs
[257608.296230] PM: suspend of drv:scsi dev:target0:0:0 complete after 503.235 msecs
[257608.296247] PM: suspend of drv:scsi dev:host0 complete after 503.131 msecs
[257608.312018] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 437.948 msecs
[257608.312036] PM: suspend of drv: dev:pci0000:00 complete after 437.160 msecs
[257608.312046] PM: suspend of devices complete after 519.491 msecs
[257608.312049] PM: suspend devices took 0.520 seconds
[257608.328110] r8169 0000:01:00.0: PME# enabled
[257608.348022] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[257608.396363] PM: late suspend of devices complete after 84.310 msecs
[257608.396480] ACPI: Preparing to enter system sleep state S3
[257608.484092] PM: Saving platform NVS memory
[257608.489714] Disabling non-boot CPUs ...
[257608.596047] CPU 1 is now offline
[257608.596439] Back to C!
[257608.596439] PM: Restoring platform NVS memory
[257608.596439] Enabling non-boot CPUs ...
[257608.596439] Booting Node 0 Processor 1 APIC 0x1
[257608.493201] Initializing CPU#1
[257608.692737] Switched to NOHz mode on CPU #1
[257608.710588] CPU1 is up
[257608.711400] ACPI: Waking up from system sleep state S3
[257608.852253] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[257608.852262] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[257608.852328] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[257608.852368] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[257608.852407] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[257608.852453] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[257608.852503] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[257608.852510] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[257608.852557] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[257608.852563] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[257608.852628] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[257608.852635] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[257608.852696] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[257608.852735] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[257608.852774] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[257608.852820] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[257608.852854] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[257608.852860] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[257608.852865] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[257608.852877] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[257608.852970] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[257608.853039] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[257608.853062] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004)
[257608.853144] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[257608.853842] PM: early resume of devices complete after 1.720 msecs
[257608.853922] i915 0000:00:02.0: setting latency timer to 64
[257608.854022] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[257608.854029] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[257608.854056] usb usb3: root hub lost power or was reset
[257608.854071] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[257608.854077] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[257608.854102] usb usb4: root hub lost power or was reset
[257608.854115] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[257608.854122] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[257608.854147] usb usb5: root hub lost power or was reset
[257608.854162] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18
[257608.854168] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[257608.854220] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[257608.854227] HDA Intel 0000:00:1b.0: setting latency timer to 64
[257608.854275] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[257608.854344] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[257608.854356] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[257608.854387] usb usb6: root hub lost power or was reset
[257608.854400] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[257608.854407] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[257608.854430] usb usb7: root hub lost power or was reset
[257608.854444] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17
[257608.854450] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[257608.854475] usb usb8: root hub lost power or was reset
[257608.854490] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[257608.854496] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[257608.854544] pci 0000:00:1e.0: setting latency timer to 64
[257608.854563] ahci 0000:00:1f.2: setting latency timer to 64
[257608.855449] sd 0:0:0:0: [sda] Starting disk
[257608.942228] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[257608.942237] r8169 0000:01:00.0: PME# disabled
[257608.955386] PM: resume of drv:button dev:PNP0C0D:00 complete after 101.394 msecs
[257608.971823] PM: resume of drv:i915 dev:0000:00:02.0 complete after 117.907 msecs
[257608.972078] PM: resume of drv:usb dev:usb3 complete after 117.208 msecs
[257608.972104] PM: resume of drv:usb dev:usb4 complete after 117.160 msecs
[257608.972107] PM: resume of drv: dev:ep_00 complete after 117.179 msecs
[257608.972120] PM: resume of drv: dev:ep_00 complete after 117.120 msecs
[257608.972126] PM: resume of drv:usb dev:usb5 complete after 117.108 msecs
[257608.972132] PM: resume of drv:hub dev:4-0:1.0 complete after 117.167 msecs
[257608.972140] PM: resume of drv: dev:ep_81 complete after 117.158 msecs
[257608.972148] PM: resume of drv:usb dev:usb6 complete after 117.056 msecs
[257608.972152] PM: resume of drv: dev:ep_00 complete after 117.078 msecs
[257608.972164] PM: resume of drv: dev:ep_00 complete after 117.013 msecs
[257608.972170] PM: resume of drv:usb dev:usb7 complete after 117.000 msecs
[257608.972175] PM: resume of drv:hub dev:6-0:1.0 complete after 117.061 msecs
[257608.972181] PM: resume of drv:hub dev:3-0:1.0 complete after 117.290 msecs
[257608.972184] PM: resume of drv: dev:ep_81 complete after 117.051 msecs
[257608.972188] PM: resume of drv:hub dev:5-0:1.0 complete after 117.149 msecs
[257608.972195] PM: resume of drv: dev:ep_81 complete after 117.287 msecs
[257608.972198] PM: resume of drv:hub dev:7-0:1.0 complete after 117.007 msecs
[257608.972206] PM: resume of drv: dev:ep_81 complete after 117.150 msecs
[257608.972209] PM: resume of drv: dev:ep_00 complete after 116.982 msecs
[257608.972217] PM: resume of drv: dev:ep_81 complete after 117.009 msecs
[257608.984052] PM: resume of drv:usb dev:usb1 complete after 129.272 msecs
[257608.984064] PM: resume of drv:hub dev:1-0:1.0 complete after 129.277 msecs
[257608.984074] PM: resume of drv: dev:ep_00 complete after 129.280 msecs
[257608.984081] PM: resume of drv: dev:ep_81 complete after 129.291 msecs
[257609.000070] PM: resume of drv:usb dev:usb2 complete after 145.271 msecs
[257609.000087] PM: resume of drv: dev:ep_00 complete after 145.237 msecs
[257609.000090] PM: resume of drv:hub dev:2-0:1.0 complete after 145.284 msecs
[257609.000098] PM: resume of drv: dev:ep_81 complete after 145.291 msecs
[257609.076077] PM: resume of drv:usb dev:usb8 complete after 220.833 msecs
[257609.076092] PM: resume of drv:hub dev:8-0:1.0 complete after 220.827 msecs
[257609.076099] PM: resume of drv: dev:ep_00 complete after 220.798 msecs
[257609.076109] PM: resume of drv: dev:ep_81 complete after 220.825 msecs
[257609.096073] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[257609.160900] PM: resume of drv:battery dev:PNP0C0A:00 complete after 205.441 msecs
[257609.180076] ata6: SATA link down (SStatus 0 SControl 300)
[257609.183907] i8042 kbd 00:07: wake-up capability disabled by ACPI
[257609.196926] ata5: SATA link down (SStatus 0 SControl 300)
[257609.235715] PM: resume of drv:usb dev:1-3 complete after 380.359 msecs
[257609.235737] PM: resume of drv: dev:ep_00 complete after 380.310 msecs
[257609.235740] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 380.364 msecs
[257609.235755] PM: resume of drv: dev:ep_01 complete after 380.364 msecs
[257609.235766] PM: resume of drv: dev:ep_82 complete after 380.357 msecs
[257609.235769] PM: resume of drv:scsi dev:host6 complete after 380.153 msecs
[257609.235784] PM: resume of drv:scsi_host dev:host6 complete after 380.151 msecs
[257609.235787] PM: resume of drv:scsi dev:target6:0:0 complete after 380.134 msecs
[257609.235806] PM: resume of drv:sd dev:6:0:0:0 complete after 380.137 msecs
[257609.235825] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 380.137 msecs
[257609.340053] usb 1-5: reset high speed USB device using ehci_hcd and address 3
[257609.400059] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[257609.519839] PM: resume of drv:usb dev:1-5 complete after 664.324 msecs
[257609.519859] PM: resume of drv: dev:ep_00 complete after 664.273 msecs
[257609.519862] PM: resume of drv:uvcvideo dev:1-5:1.0 complete after 664.328 msecs
[257609.519871] PM: resume of drv:uvcvideo dev:1-5:1.1 complete after 664.302 msecs
[257609.519873] PM: resume of drv: dev:ep_83 complete after 664.323 msecs
[257609.523648] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[257609.528847] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[257609.528851] ata2.00: configured for UDMA/100
[257609.732047] usb 8-1: reset low speed USB device using uhci_hcd and address 2
[257610.039275] PM: resume of drv:usb dev:8-1 complete after 1183.569 msecs
[257610.039301] PM: resume of drv:usbhid dev:8-1:1.0 complete after 1183.578 msecs
[257610.039304] PM: resume of drv: dev:ep_00 complete after 1183.542 msecs
[257610.039309] PM: resume of drv: dev:ep_81 complete after 1183.568 msecs
[257611.644076] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[257611.645513] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[257611.651351] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[257611.651633] ata1.00: configured for UDMA/100
[257611.682411] PM: resume of drv:sd dev:0:0:0:0 complete after 2826.962 msecs
[257611.682425] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2826.929 msecs
[257611.682436] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2479.937 msecs
[257611.697065] PM: resume of devices complete after 2843.189 msecs
[257611.697369] PM: resume devices took 2.844 seconds
[257611.697401] PM: Finishing wakeup.
[257611.697403] Restarting tasks ... done.
[257611.725238] video LNXVIDEO:00: Restoring backlight state
[257612.176071] r8169 0000:01:00.0: eth0: link down
[257612.176636] ADDRCONF(NETDEV_UP): eth0: link is not ready
[257612.194866] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[257614.008263] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[257614.009644] wlan0: authenticated
[257614.009712] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[257614.011431] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=3)
[257614.011436] wlan0: associated
[257614.012569] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[257614.012862] cfg80211: Calling CRDA for country: US
[257614.020685] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[257614.020690] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020693] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[257614.020696] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020699] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[257614.020702] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020704] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[257614.020707] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020710] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[257614.020713] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020715] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[257614.020718] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020722] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[257614.020725] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020727] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[257614.020730] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020732] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[257614.020735] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020738] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[257614.020741] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020743] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[257614.020746] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[257614.020749] cfg80211: Disabling freq 2467 MHz
[257614.020751] cfg80211: Disabling freq 2472 MHz
[257614.020752] cfg80211: Disabling freq 2484 MHz
[257614.020756] cfg80211: Regulatory domain changed to country: US
[257614.020758] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[257614.020761] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[257614.020764] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[257614.020767] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[257614.020770] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[257614.020773] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[257614.020776] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[257615.183427] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[257624.968020] wlan0: no IPv6 routers present
[259425.939268] wlan0: deauthenticating from 00:25:3c:7f:a1:a9 by local choice (reason=3)
[259426.012100] cfg80211: All devices are disconnected, going to restore regulatory settings
[259426.012106] cfg80211: Restoring regulatory settings
[259426.012110] cfg80211: Calling CRDA to update world regulatory domain
[259426.017444] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[259426.017451] cfg80211: World regulatory domain updated:
[259426.017453] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[259426.017456] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259426.017459] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[259426.017462] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[259426.017465] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259426.017467] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259426.929025] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[259427.979686] PM: Syncing filesystems ... done.
[259427.994219] PM: Preparing system for mem sleep
[259428.422063] Freezing user space processes ... (elapsed 0.01 seconds) done.
[259428.436064] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[259428.452053] PM: Entering mem sleep
[259428.452097] Suspending console(s) (use no_console_suspend to debug)
[259428.464234] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[259428.464353] sd 0:0:0:0: [sda] Stopping disk
[259428.538970] i8042 aux 00:08: wake-up capability disabled by ACPI
[259428.541901] i8042 kbd 00:07: wake-up capability enabled by ACPI
[259428.542019] ehci_hcd 0000:00:1d.7: PCI INT B disabled
[259428.542032] uhci_hcd 0000:00:1d.2: PCI INT D disabled
[259428.542044] uhci_hcd 0000:00:1d.1: PCI INT C disabled
[259428.542058] uhci_hcd 0000:00:1d.0: PCI INT B disabled
[259428.542300] uhci_hcd 0000:00:1a.2: PCI INT C disabled
[259428.542316] uhci_hcd 0000:00:1a.1: PCI INT B disabled
[259428.542332] uhci_hcd 0000:00:1a.0: PCI INT A disabled
[259428.556029] ehci_hcd 0000:00:1a.7: PCI INT D disabled
[259428.644376] HDA Intel 0000:00:1b.0: PCI INT A disabled
[259428.644417] ACPI handle has no context!
[259428.660017] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 117.942 msecs
[259428.971737] PM: suspend of drv:sd dev:0:0:0:0 complete after 507.506 msecs
[259428.971749] PM: suspend of drv:scsi dev:target0:0:0 complete after 507.433 msecs
[259428.971768] PM: suspend of drv:scsi dev:host0 complete after 507.312 msecs
[259428.984020] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 442.037 msecs
[259428.984040] PM: suspend of drv: dev:pci0000:00 complete after 441.242 msecs
[259428.984049] PM: suspend of devices complete after 531.480 msecs
[259428.984052] PM: suspend devices took 0.532 seconds
[259429.000121] r8169 0000:01:00.0: PME# enabled
[259429.020023] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[259429.068314] PM: late suspend of devices complete after 84.257 msecs
[259429.068431] ACPI: Preparing to enter system sleep state S3
[259429.156091] PM: Saving platform NVS memory
[259429.157437] Disabling non-boot CPUs ...
[259429.264048] CPU 1 is now offline
[259429.264422] Back to C!
[259429.264422] PM: Restoring platform NVS memory
[259429.264422] Enabling non-boot CPUs ...
[259429.264422] Booting Node 0 Processor 1 APIC 0x1
[259429.161199] Initializing CPU#1
[259429.360714] Switched to NOHz mode on CPU #1
[259429.378603] CPU1 is up
[259429.379428] ACPI: Waking up from system sleep state S3
[259429.520253] i915 0000:00:02.0: restoring config space at offset 0x6 (was 0xc, writing 0xc000000c)
[259429.520261] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[259429.520328] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[259429.520367] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[259429.520406] uhci_hcd 0000:00:1a.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[259429.520453] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[259429.520503] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[259429.520509] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[259429.520557] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[259429.520563] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[259429.520628] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[259429.520635] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[259429.520696] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[259429.520735] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[259429.520774] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2900005, writing 0x2900001)
[259429.520820] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[259429.520854] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[259429.520859] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[259429.520865] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0)
[259429.520877] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[259429.520969] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
[259429.521038] pci 0000:00:1f.6: restoring config space at offset 0xf (was 0x300, writing 0x30b)
[259429.521061] pci 0000:00:1f.6: restoring config space at offset 0x4 (was 0x4, writing 0xd4704004)
[259429.521143] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407)
[259429.521840] PM: early resume of devices complete after 1.717 msecs
[259429.521920] i915 0000:00:02.0: setting latency timer to 64
[259429.522019] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[259429.522026] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[259429.522052] usb usb3: root hub lost power or was reset
[259429.522067] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[259429.522073] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[259429.522098] usb usb4: root hub lost power or was reset
[259429.522111] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
[259429.522118] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[259429.522143] usb usb5: root hub lost power or was reset
[259429.522158] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 18 (level, low) -> IRQ 18
[259429.522164] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[259429.522214] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[259429.522221] HDA Intel 0000:00:1b.0: setting latency timer to 64
[259429.522268] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[259429.522319] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[259429.522326] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[259429.522352] usb usb6: root hub lost power or was reset
[259429.522365] uhci_hcd 0000:00:1d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[259429.522371] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[259429.522396] usb usb7: root hub lost power or was reset
[259429.522409] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17
[259429.522415] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[259429.522441] usb usb8: root hub lost power or was reset
[259429.522457] ehci_hcd 0000:00:1d.7: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[259429.522463] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[259429.522512] pci 0000:00:1e.0: setting latency timer to 64
[259429.522531] ahci 0000:00:1f.2: setting latency timer to 64
[259429.523627] sd 0:0:0:0: [sda] Starting disk
[259429.610526] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[259429.610535] r8169 0000:01:00.0: PME# disabled
[259429.623690] PM: resume of drv:button dev:PNP0C0D:00 complete after 101.701 msecs
[259429.639566] PM: resume of drv:i915 dev:0000:00:02.0 complete after 117.651 msecs
[259429.640077] PM: resume of drv:usb dev:usb3 complete after 117.227 msecs
[259429.640104] PM: resume of drv:usb dev:usb4 complete after 117.148 msecs
[259429.640109] PM: resume of drv: dev:ep_00 complete after 117.175 msecs
[259429.640121] PM: resume of drv: dev:ep_00 complete after 117.087 msecs
[259429.640128] PM: resume of drv:usb dev:usb5 complete after 117.068 msecs
[259429.640133] PM: resume of drv:hub dev:4-0:1.0 complete after 117.148 msecs
[259429.640142] PM: resume of drv: dev:ep_81 complete after 117.131 msecs
[259429.640150] PM: resume of drv:usb dev:usb6 complete after 116.988 msecs
[259429.640154] PM: resume of drv: dev:ep_00 complete after 117.017 msecs
[259429.640165] PM: resume of drv: dev:ep_00 complete after 116.926 msecs
[259429.640172] PM: resume of drv:usb dev:usb7 complete after 116.908 msecs
[259429.640177] PM: resume of drv:hub dev:6-0:1.0 complete after 116.986 msecs
[259429.640182] PM: resume of drv:hub dev:3-0:1.0 complete after 117.300 msecs
[259429.640184] PM: resume of drv: dev:ep_81 complete after 116.970 msecs
[259429.640189] PM: resume of drv:hub dev:5-0:1.0 complete after 117.101 msecs
[259429.640196] PM: resume of drv: dev:ep_81 complete after 117.290 msecs
[259429.640199] PM: resume of drv:hub dev:7-0:1.0 complete after 116.906 msecs
[259429.640207] PM: resume of drv: dev:ep_81 complete after 117.095 msecs
[259429.640214] PM: resume of drv: dev:ep_00 complete after 116.866 msecs
[259429.640220] PM: resume of drv: dev:ep_81 complete after 116.902 msecs
[259429.652052] PM: resume of drv:usb dev:usb1 complete after 129.323 msecs
[259429.652065] PM: resume of drv:hub dev:1-0:1.0 complete after 129.329 msecs
[259429.652079] PM: resume of drv: dev:ep_00 complete after 129.330 msecs
[259429.652085] PM: resume of drv: dev:ep_81 complete after 129.340 msecs
[259429.668072] PM: resume of drv:usb dev:usb2 complete after 145.309 msecs
[259429.668082] PM: resume of drv:hub dev:2-0:1.0 complete after 145.315 msecs
[259429.668087] PM: resume of drv: dev:ep_00 complete after 145.265 msecs
[259429.668090] PM: resume of drv: dev:ep_81 complete after 145.314 msecs
[259429.744113] PM: resume of drv:usb dev:usb8 complete after 220.745 msecs
[259429.744140] PM: resume of drv:hub dev:8-0:1.0 complete after 220.743 msecs
[259429.744149] PM: resume of drv: dev:ep_81 complete after 220.728 msecs
[259429.744152] PM: resume of drv: dev:ep_00 complete after 220.702 msecs
[259429.764055] usb 1-3: reset high speed USB device using ehci_hcd and address 2
[259429.828887] PM: resume of drv:battery dev:PNP0C0A:00 complete after 205.124 msecs
[259429.845163] i8042 kbd 00:07: wake-up capability disabled by ACPI
[259429.849566] ata6: SATA link down (SStatus 0 SControl 300)
[259429.864046] ata5: SATA link down (SStatus 0 SControl 300)
[259429.903788] PM: resume of drv:usb dev:1-3 complete after 380.279 msecs
[259429.903811] PM: resume of drv: dev:ep_00 complete after 380.207 msecs
[259429.903815] PM: resume of drv:usb-storage dev:1-3:1.0 complete after 380.277 msecs
[259429.903836] PM: resume of drv: dev:ep_01 complete after 380.277 msecs
[259429.903839] PM: resume of drv:scsi dev:host6 complete after 380.045 msecs
[259429.903842] PM: resume of drv: dev:ep_82 complete after 380.258 msecs
[259429.903848] PM: resume of drv:scsi_host dev:host6 complete after 380.037 msecs
[259429.903857] PM: resume of drv:scsi dev:target6:0:0 complete after 380.027 msecs
[259429.903884] PM: resume of drv:sd dev:6:0:0:0 complete after 380.036 msecs
[259429.903903] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 380.037 msecs
[259430.008051] usb 1-5: reset high speed USB device using ehci_hcd and address 3
[259430.068058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[259430.183417] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[259430.187780] PM: resume of drv:usb dev:1-5 complete after 664.088 msecs
[259430.187800] PM: resume of drv: dev:ep_00 complete after 664.035 msecs
[259430.187803] PM: resume of drv:uvcvideo dev:1-5:1.0 complete after 664.090 msecs
[259430.187816] PM: resume of drv:uvcvideo dev:1-5:1.1 complete after 664.071 msecs
[259430.187819] PM: resume of drv: dev:ep_83 complete after 664.091 msecs
[259430.188631] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[259430.188636] ata2.00: configured for UDMA/100
[259430.400047] usb 8-1: reset low speed USB device using uhci_hcd and address 2
[259430.711505] PM: resume of drv:usb dev:8-1 complete after 1187.621 msecs
[259430.711529] PM: resume of drv: dev:ep_00 complete after 1187.586 msecs
[259430.711532] PM: resume of drv:usbhid dev:8-1:1.0 complete after 1187.624 msecs
[259430.711545] PM: resume of drv: dev:ep_81 complete after 1187.625 msecs
[259432.304076] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[259432.305517] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[259432.314190] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[259432.314489] ata1.00: configured for UDMA/100
[259432.345245] PM: resume of drv:sd dev:0:0:0:0 complete after 2821.616 msecs
[259432.345269] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2821.596 msecs
[259432.345273] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 2481.647 msecs
[259432.358236] PM: resume of devices complete after 2836.360 msecs
[259432.372301] PM: resume devices took 2.852 seconds
[259432.372340] PM: Finishing wakeup.
[259432.372342] Restarting tasks ... done.
[259432.395462] video LNXVIDEO:00: Restoring backlight state
[259433.203849] r8169 0000:01:00.0: eth0: link down
[259433.204260] ADDRCONF(NETDEV_UP): eth0: link is not ready
[259433.228699] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[259435.583707] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=600
[259435.751687] wlan0: authenticate with 00:25:3c:7f:a1:a9 (try 1)
[259435.755593] wlan0: authenticated
[259435.755649] wlan0: associate with 00:25:3c:7f:a1:a9 (try 1)
[259435.757408] wlan0: RX AssocResp from 00:25:3c:7f:a1:a9 (capab=0x431 status=0 aid=4)
[259435.757412] wlan0: associated
[259435.758130] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[259435.758204] cfg80211: Calling CRDA for country: US
[259435.768277] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[259435.768282] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768285] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[259435.768288] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768290] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[259435.768293] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768296] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[259435.768299] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768301] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[259435.768304] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768307] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[259435.768310] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768312] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[259435.768315] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768318] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[259435.768320] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768323] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[259435.768326] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768328] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[259435.768331] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768333] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[259435.768336] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2700 mBm)
[259435.768339] cfg80211: Disabling freq 2467 MHz
[259435.768341] cfg80211: Disabling freq 2472 MHz
[259435.768342] cfg80211: Disabling freq 2484 MHz
[259435.768346] cfg80211: Regulatory domain changed to country: US
[259435.768348] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[259435.768351] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[259435.768354] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[259435.768357] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259435.768360] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259435.768363] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[259435.768365] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[259446.016021] wlan0: no IPv6 routers present

User avatar
Dracice
Development Team
Development Team
Posts: 69
Joined: December 23rd, 2009, 6:02 pm

Re: Linux Regnum help

Unread post by Dracice » August 3rd, 2011, 5:27 am

ok u need use workaround on vesa intel driver, cos that GPU is ehm... piece off shitt :-D and regnum dont wanna run on it under linux
use this HOWTO :
http://regnumonline.com.ar/forum/showthread.php?t=31371
Dracice ⚔ [60] : Salamek ⚕ [30] : Caprica Six [50]

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest